When it comes to saving, Hobart CLe dishwashers let you really clean up.

Strong and powerful spray forms an S-shaped pattern. Start by saving up to $9,192 a year. That’s how much you could save with Hobart’s exclusive Opti-Rinse™ technology. Opti-Rinse technology reduces water consumption so dramatically, the final rinse water required could be as low as .39 gallons per rack.

A small boost for big savings.

The CLe is so efficient, the specifications for a booster heater continue to be reduced. Small in size, it costs less and requires less energy.

Putting saving on automatic.

To preserve energy, the CLe has an Auto-timer that automatically shuts off the pumps and conveyor after a preset time, once the rack exits the machine. It restarts the warewasher when a rack re-enters. And every CLe Dishwasher has an exclusive Energy Saver mode that can be set by the customer to automatically shut off the entire dish machine, except for the controls, after one to six hours of inactivity, for even more saving.

Even Hobart’s tanks are designed to save you money.

They’re deeper, creating a smaller surface area, which helps maintain water temperature and reduces energy. The deep-tank design also requires fewer refills, saving water and detergent, too.

The cascading water system on the multi-tank models replenishes each tank with the heated water from the prior tank as it goes from the final rinse to prewash zone, saving energy and water. Hobart’s patent-pending thermal layered curtains reduce heat loss at both the load and unload ends on an average of 2ºF to 3ºF. And the door-actuated drain closures ensure that the drains are closed—saving water, energy and detergent.

Highly effective Power Scrapper.

There’s even a highly effective Power Scrapper prewash specifically designed for heavier food-soil removal. It uses the heated, detergent-filled water from the wash tank, saving not only water and energy, but labor and detergent, too. The wash water also stays cleaner longer, reducing the need for refills.

Hobart CLe Dishwashers offer unrivaled reliability and durability for lower cost of ownership.

A machine doesn’t become the most popular conveyor warewasher in the industry unless it delivers day in and day out. Over the decades, you’ve come to rely on our durability and performance. Your trust is well founded. Hobart Warewashers have the highest documented uptime in the industry. Hobart, CLe and reliability are one and the same.

Painstaking attention to all the details.

Its durability and long life start with a heavy-gauge, stainless steel frame, legs and tanks, which together add greater strength and structural integrity to the entire unit. The dual-point drive reduces stress on the conveyor drive for increased reliability. The double-walled, insulated stainless steel doors and heavy-duty stainless steel brackets stand up to the toughest possible use.

Features that add peace of mind and protection.

A variety of features helps ensure that the CLe is reliable and hard-working. The self-draining stainless steel pump and impeller provide trouble-free longer life and no bacteria-laden water in the pump. And an integrated pump intake screen keeps debris out of the pump, reducing downtime. The screen is removable for easy cleaning.

Opti-Rinse nozzles are made of KYNAR® resin to resist corrosion, chemicals, clogging and heat. As a result, the nozzles last longer. The CLe provides low-water sensors in the wash and power-rinse tanks to protect heating elements. And the fully wrapped front, bottom and side panels help safeguard the electrical components, including the motors, from possible moisture damage.

The most energy- and water-efficient conveyor-type Hobart warewasher ever. The Advansys™ CLeR.

The Advansys CLeR brings Hobart’s Energy Recovery technology to the industry-leading water and energy savings of Opti-Rinse. The result? A conveyor-type warewasher with Hobart’s legendary longevity built-in that saves you so much in both energy and water, it could literally pay for itself within a few years, depending upon your warewashing volume. 

The CLeR is all CLe. The Advansys CLeR delivers the same great performance all CLe warewashers offer. All the features you love in the CLe, features that have made it the most popular conveyor-type warewasher in the field—from Hobart’s exclusive Opti-Rinse technology for 50% less energy and water usage than comparable models to the Power Scrapper and thermal layered curtains—are here in the Advansys CLeR. With its Energy Recovery, the CLeR is just more of a good thing.

Combined energy and water savings deliver an annual ROI in the five figures. With a combined savings of more than $11,000—$2,047 from Energy Recovery and $9,192 due to Opti-Rinse—the Advansys CLeR sets a new standard in the low-cost operation of a conveyor-type warewasher capable of cleaning and sanitizing up to 8,550 dishes an hour.

All the CLe’s savings are built into the CLeR. The CLeR has the identical integrated array of technologies and innovative designs that mark all CLe warewashers. Designed to save water, energy, detergent and labor, the CLeR is manufactured to truly legendary standards, standards of reliability and durability that have made Hobart conveyor-type warewashers the most popular in the industry.

A brief overview of the many additional saving features of the CLeR.

• Auto-timer to save energy
• Tanks designed to retain water temperature, reducing energy consumption
• Cascading water system (on multi-tank models) to save water, energy and detergent
• Power Scrapper designed to reduce water, energy, detergent and labor
• Reliability and durability for lower cost of ownership

• Optimum hygienic safety by deep drawn tanks
• Tank insulation
• Heat recovery C20
• Stainless steel strainer system completely covering wash tanks
• Including rinse actuator
• Including main switch
• Including autotimer
• Stainless steel wash pump
• Protronic control

• SENSOTRONIC automatically adjusts consumption to the actual load in the rack-type dishwasher. The system autodetects the amount of washware as well as empty sections and reduces the consumption to a necessary minimum. 
• Your benefit: cost savings you will notice.
• COMPARTMENT DETECTION AUTO-SAVE
• The program automatically detects gaps without racks and immediately reduces the fresh water supply down to the minimum necessary for a perfectly hygienic result while cutting water, power and detergent consumption.
• WATER CONSUMPTION CONTROL AQUA-ADAPT
• The system automatically adjusts the hourly fresh water consumption to the selected transfer speed, keeping water volumes per meter of the dishwasher at all times at an optimized level. 
• RESOURCE MANAGEMENT MINIMAL
• The fresh water consumption is automatically reduced so that operating costs are significantly lowered. The total savings for water, energy and chemicals can amount to up to 10 %, depending on the machine type.
• WASHWARE DETECTION ACTIVE (OPTIONAL)
• Optional wash ware detection system that adjusts the wash process to the high demands of glassware and cutlery washing. Coded glass racks are automatically detected in the machine, and the wash parameters are configured to match the new requirements.
• SYSTEM CHECK BEST-START
• Each time the machine is filled with new soiled goods, the relevant parameters for hygiene and proper washing, such as the heating system, pump and wash arm are automatically checked for correct positioning and operation.

• Active soil removal from the zone
• Constant high-level wash water quality
• Reduction in water, energy, and chemicals consumption
• Reduces refilling during operation
• Convenient removal of soiling at the end of the diswashing shift
• No soiling spreading around the appliance

• Reduces fresh water consumption by up to 60%
• Detergent is rinsed off the wash ware in an optimal way
• Microfine spraying of clear rinse water from four sides
• Significant reduction in rinse aid and energy consumption

• Reduces detergent consumption by up to 80%
• Detergent dosing only necessary for approx. 75 l/h of regeneration water
• Environmentally friendly

• Energy loss- and costs are reduced by up to 20%
• Temperature equalization only takes places within the machine
• High temperature wash zone is embedded between low temperature pre-wash and fresh water rinse zone.

• Reduces evaporation losses
• Reduces energy losses by up to 15 %
• Reduces the primary energy demand

• Uses energy from the extracted air to heat up the incoming water
• Energy saving of up to 8.5 kwh
• Simple cleaning

• Heat energy is recovered from the hot extracted air
• Energy saving of up to 10kwh
• Heats the wash and rinse water

• 6 upper and 5 lower wash arms guarantee an optimal wash result
• More active contact of wash water with wash ware
• Precise spray pattern due to each wide angle nozzle fan

• 65% wider spray pattern due to optimal nozzle geometry
• Due to the high precision of the wide angle nozzles, wash warms can be put tighter together
• Wash water is distributed efficiently, spray shadows are avoided

• Increases the machine capacity by up to 50 %
• Continuous wash temperature of approx. 67°C
• Guaranteed hygiene safety due to hot washing

• Perfect rinse result due to three-step zone
• Minimization of detergent concentration in the rinse

• High temperature input into the wash ware by continuous water recirculation
• Considerably increased self-drying effect due to high temperature absorbed by the wash ware

• Innovative control with text - and symbol display
• Operated by touch screen
• Simple, intuitive operation 

• featuring
• PROTRONIC control
• Drop-In wash system
• Coded wash and rinse arms
• Coded curtains

• including
• Wash system
• Bayonet catch
• Completely moulded tanks
• 1-part strainer
• 150 mm floor clearance
• Condenser
• Panorama door
• Cleaning Assistance

• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump
• Electronic Control SMARTRONIC: with status indication
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood - a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Rinse Pump ACCURINSE: guarantees a constant 2,5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump
• Electronic Control SMARTRONIC: with status indication
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood - a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Rinse Pump ACCURINSE: guarantees a constant 2,5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber

* Hot water connection

** with 230/50/1 and 20A

• ECO Vapo Rinse: switchable steam rinse cycle reduces fresh-water consumption to 1.0 l. Saving of up to 60 % water and detergent as well as up to 60 % rinse aid (compared with standard machines)
• PERFECT Drying Manager: assistance for better drying results
• VAPOSTOP Door System: prevents vapour to escape from machine when door is opened
• Cutlery cycle: removes even persistent residues by the use of steam
• STARCH REMOVAL Cleaning Cycle: removes the starch from the crockery
• Washing HOT-TEMP: higher temperature increases the capacity up to 45 racks/h
• VISIOTRONIC Intelligent Control: ensures a simple and intuitive operating with a single button. When the display is activated by a proximity sensor, all the necessary information appears in the large display, in clear text or in the form of symbols
• Intelligent wash water control: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result. This reduces the amount of fresh water used per rinse cycle up to 2.0 l
• Double rack system: two racks can be washed in a single wash cycle. One rack of cups can be washed underneath, while a second rack containing dishes and cutlery can also be washed above it. Thanks to the optimum use of the entire wash chamber the performance of the machine can be doubled
• CLIP-IN Wash and Rinse Arms both the wash and rinse arms can be lifted out of the wash chamber and replaced with one hand and without any tools
• Intelligent data documentation: automatic recording of important operational data and consumptions and indication on the display
• USB-interface: comfortable download of operational data in form of a protocol via USB
• Fill level indicator: monitors contents of external as well as integrated chemical containers
• PROOF Strainer Control: prevents operation without tank strainer
• GENIUS-X² Fine Filter System: advanced filter system with prewash function reduces detergent consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse cycle to wash glasses with critical design with raised fresh-water amount
• HYGIENE Machine Care Programme: for removal of calciumcarbonate and other deposits from wash chamber
• Multi-phasing: can be connected to 400/50/3N as well as 230/50/1 (standard machine comes with three phase cable)
• Ready to install - completely equipped: fill / drain hose, power cord (400 V connection), detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
• Nominal capacity up to 45 racks, 810 plates or 1,620 glasses per hour / with double rack up to 90 racks per hour

The FT900 is built to help you work better.

In a busy kitchen, every time-saver is a benefit. These FT900’s save you time and increase your peace of mind.

The digital control panel provides the operator with crucial information at a glance, such as machine status and temperatures. So whether it’s an operational indicator (the machine is filling with water) or an alert (a door is open), little troubleshooting is required.

Efficiency from every angle. Conveyor start-and-stop controls are located for easy access at the load, unload and the center of the machine. And the wash arm design makes correct installation simple, allowing for proper machine operation.

Lightening the load on your operators. The FT900 helps the operator work more efficiently, too. Ergonomic platform heights for staging ware at both ends of the machine minimize reaching, letting operators load and unload with ease.

With the FT900, you can also match the dishwasher’s speed to the type of residue on the ware.

Speed it up or slow it down—an adjustable conveyor speed of 4 to 8.5 FPM (depending on model) lets you adjust to the type of ware, soiled condition or workforce requirements. So more lightly soiled ware can be cleaned in less time, while more time can be taken with heavily soiled ware.

Easy to work with before you even turn it on. Professional installation sets the tone for years of easy operation. Our factory-trained service team provides the basic assembly. The modular design of the FT900 means the unit installs quickly and reliably. Corded and cabled prewired connections simplify installation and minimize the need for service. Single-point ventilation reduces the number of connections, saving time and installation expense.

Fast, reliable service. The Hobart FT900 Flight-Type Dishwasher comes with a comprehensive one-year warranty on parts and labor. Hobart’s factory-trained service team—1,700 professionals strong—is by far the largest and most experienced of any manufacturer in the industry. And when you select Hobart Service for your installation, you’ll receive an extra six months of warranty coverage. Extended service plans and complete turnkey installations are also available.

It can clean all day. But you can clean it in no time.

We designed the FT900 with easy access and thoughtful construction to keep cleaning time to a minimum.

Lift-off panels throughout the machine provide greater access to clean under and around the conveyor, as well as maintain the machine.

Large, hinged doors provide operators greater access to the interior. The smooth surface of the fully enclosed back panels and the rear manifold design create an obstruction-free interior for quick cleanup between shifts.

To reduce debris on the load platform, our exclusive, removable flush arm rinses food scraps from the loading section into the prewash area scrap basket. The stainless steel debossed wash arm manifolds are easy to remove, clean and replace. And our drawn tanks with coved corners and a limited number of welded seams make them easier to clean for optimum efficiency and labor savings.

Fewer parts mean less to maintain. Instead of multiple screens and scrap baskets, each tank is fitted with just one flat screen and one scrap basket. This makes for quicker and more efficient breakdown and cleaning, and it saves the operator a great amount of time.

• STANDARD FEATURES
• 1⁄2 H.P. motor
• Manual ON/OFF switch
• 6 foot cord & plug
• 174 RPM transmission
• Stainless steel housing
• Stainless steel legs with rubber feet
• Spiral-fluted chopping end
• Stay-Sharp knife
• Steel plate
• Plastic feed stomper

• Red OFF, Green ON Button
• Compact Design
• Angled Front
• Planetary Drive
• Large Half Size Feed Hopper
• All Aluminum Hopper and Housing
• Interlock Switch
• Plate Speed of 420 RPMs

• Red OFF, Green ON Button
• Compact Design
• Angled Front
• Planetary Drive
• Large Half Size Feed Hopper
• All Aluminum Hopper and Housing
• Double Interlock Switch
• Plate Speed of 430 RPMs

• Reduced footprint
• 3 H.P. motor
• Direct gear drive transmission
• Tri-rail carriage
• Open frame stainless steel construction
• Center crown pulley
• Removable double flanged pulleys
• Split rear table
• Direction grain stainless steel
• Pivoted automatic tension
• Adjustable legs

• 3 H.P. motor
• Direct gear drive transmission
• Tri-rail carriage
• Open frame stainless steel construction
• Center crown pulley
• Removable double flanged pulleys
• Split rear table
• Direction grain stainless steel
• Pivoted automatic tension
• Stainless steel top cover
• Adjustable legs

• 5 H.P. Motor
• 45-Quart Capacity Stainless Steel Bowl with Pouring Lip
• Durable Steel Base with Epoxy Enamel Finish
• Electromechanical Safety Interlocks
• Start/Stop Push Button Switches
• 5 Minute Timer with “Hold” and “Jog” Settings
• Counterbalanced Clear Lexan® Polycarbonate Bowl Cover with Stainless Steel Support Bar
• Bowl Tilt Lever
• Stainless Steel Mixing Baffle with Pour-Through Center Shaft
• 2 Blade Cut/Mix Knife
• Knead/Mix Attachment
• Polypropylene Strainer Basket
• 6' Power Cable, Plug and Receptacle

• Heavy-Duty 1⁄2 H.P. Motor
• Gear Transmission
• Three Fixed Speeds Plus Stir Speed
• Shift-on-the-Fly™ Controls
• Patented soft start Agitation Technology
• 15-Minute SmartTimer™
• Automatic Time Recall
• Large, Easy-To-Reach Controls
• Single Point Bowl Installation
• Ergonomic Swing-Out Bowl
• #12 Taper Attachment Hub
• Open Base
• Stainless Steel Bowl Guard
• Metallic Gray Hybrid Powder Coat Finish

• Heavy-Duty 1⁄2 H.P. Motor
• Gear Transmission
• Three Fixed Speeds Plus Stir Speed
• Shift-on-the-Fly™ Controls
• Patented soft start Agitation Technology
• 15-Minute SmartTimer™
• Automatic Time Recall
• Large, Easy-To-Reach Controls
• Single Point Bowl Installation
• Ergonomic Swing-Out Bowl
• #12 Taper Attachment Hub
• Open Base
• Stainless Steel Bowl Guard
• Metallic Gray Hybrid Powder Coat Finish

• Heavy-Duty 3⁄4 H.P. Motor
• Gear Transmission
• Three Fixed Speeds Plus Stir Speed
• Shift-on-the-Fly™ Controls
• Patented soft start Agitation Technology
• 15-Minute SmartTimer™
• Automatic Time Recall
• Large, Easy-To-Reach Controls
• Single Point Bowl Installation
• Ergonomic Swing-Out Bowl
• #12 Taper Attachment Hub
• Open Base
• Stainless Steel Bowl Guard
• Metallic Gray Hybrid Powder Coat Finish
• Rubber Foot Pads Provided

• Heavy-Duty 11⁄2 H.P. Motor
• Gear Transmission
• Three Fixed Speeds Plus Stir Speed
• Shift-on-the-Fly™ Controls
• Patented soft start Agitation Technology
• 20-Minute SmartTimer™
• Automatic Time Recall
• Large, Easy-To-Reach Controls
• Single Point Bowl Installation
• Ergonomic Swing-Out Bowl
• #12 Taper Attachment Hub
• Open Base
• Stainless Steel Bowl Guard
• Metallic Gray Hybrid Powder Coat Finish
• Rubber Foot Pads Provided

• 4 fixed speeds plus stir speed
• Gear transmission
• 50-minute SmartTimer™
• Ergonomic swing-out bowl
• Shift-on-the-Fly™ controls
• Single point bowl installation
• Power bowl lift
• Without attachment hub
• Stainless steel bowl guard (CE)
• Rubber foot pads
• 80 litre bowl, stainless steel
• B“ flat beater, aluminum
• "D" wire ship, stainless steel
• "ED“ dough hook, aluminum
• Ingredient chute, stainless steel

It might look like a simple barcode, but it's actually a delicious recipe for ricotta lasagna. 

Scan and press Start. A new dimension in ease of operation.

Now you can quickly and easily turn your every recipe into a barcode that your staff can simply scan for cooking in a Hobart Combi® Oven. All the operator has to do is load the product and press Start.

The combi oven automatically loads the cooking program and goes into preheat mode when the barcode is scanned. In fact, using short range wireless technology, you can transmit your barcode recipes to the combi oven or extract with compatible computer, PDA or cell phone.

Once the product—lasagna, chicken, pork chops, fish filets or any number of recipes—is properly prepared by your staff, they just place it in the combi and press Start. The result is a delicious product cooked precisely the way you want it, even if you’re thousands of miles away.

The Hobart Combi Barcode Scanner Software.
Its range is infinite. So is yours. 

With Hobart’s exclusive combi scanner software, you’re no longer limited to the 100-recipe memory of the combi oven. In fact, you can create any number of recipes, each linked to a unique barcode. That’s because when you scan or transmit your barcode to the combi oven, you are literally sending the whole recipe to the oven.

As a result, your staff no longer has to scroll through the combi’s control panel, push multiple buttons for operation or even become trained on the controls of a combi, giving your staff more time to devote to other tasks, like preparing the product.

Creating the perfect recipe.

Designed expressly for programming the Hobart Combi Oven, Hobart’s scanner software guides you through all the phases (up to 10) of programming your recipe. At each phase, you can stipulate the mode of cooking (convection, steam or combination), the temperature setting, length of time or core probe function, humidity level and fan speed. Add another phase if your recipe requires it. When finished, simply save and transfer the program to the combi.

For complete cooking instructions, just press Print.

With Hobart’s combi barcode scanner system, you can print a list of your recipes—each with its unique barcode—for your staff to scan. You can also paste your recipe barcodes directly into a custom document, providing your staff with the recipe and full preparation instructions.

The Hobart Scanner reads food and package barcodes, too.

Barcodes, of course, are ubiquitous. Every food package has one. Every box, too. Now you can link that barcode to a recipe stored in the combi for simply unheard-of speed and efficiency in preparing meals.

The Hobart Combi Barcode Scanner can turn almost anyone into a gourmet chef.

According to the U.S Department of Labor, 37% of foodservice workers are under 24 years of age. The numbers in food retail are very similar. Aside from preparing microwave popcorn, many if not most of these foodservice workers probably haven’t cooked much in their young lives.

With the Hobart Combi Barcode Scanner, you can more than compensate for their lack of cooking skills by putting the wealth of your knowledge and experience literally in the palm of their hand.

To start, just press 1-888-4HOBART.
To see how quickly and easily you can get your foodservice or food retail operation into a serve-and-scan mode, just pick up the phone.

Water Filtration Systems. Hobart offers a wide variety of water filtration systems. Because water quality is different in every location and affects equipment differently, click here to determine the best water treatment solution for your kitchen.

ee how Elkhart Schools are using their Combi Ovens

 Versatile Combi-Oven at Ivy Tech.  

 Cooking the perfect egg at Ivy Tech.  

 Cooking the perfect steak at Ivy Tech. 

 Preparing Terrine at Ivy Tech.  

Easy-to-use ovens at Elkhart schools.
(1:04 min)

Healthy, high-quality food at Elkhart schools.
(1:06 min)

Increased productivity at Elkhart schools.
(0:58 min)

The end of hard water at Elkhart schools.
(0:51 min)

For more pictures, video and information on the Hobart Combi Oven and Barcode Scanner.

  

Sign-in now to Hobart's Resource Center to access valuable resources such as operation manuals, parts catalogs, downloadable photos, brochures and videos. This information is available to customers, consultants, dealers and media upon registration. If you are not currently registered, please click on the new user link at the bottom of the sign-in page.

• 1 cooking chamber for 1/2 pans each up to depth max. 138 mm
• 3 pressure levels:                                                                                                                     pressureless: 50° - 99°C
• 0.5 bar: appr. 110°C
• 1 bar: 118°C
• Automatic defrost facility
• Water level control with display
• Electronic timing control
• Self diagnosis with malfunction display
• Digital display for chamber pressure
• Individual temperature programme (TP), stepless adjustable from 50°C to 99°C at low temperature cooking with 0 bar
• Steam extractor in combination with incorporated condenser
• Automatic booster drain facility after work end
• Automatic self-cleaning programof steam extractor after work end
• Electronics prepared for use of core temperature probe
• Potential free contacts for connection to capacity optimization device
• HCPC system: HACCP data memory and connection via infra-red

• Ideal for use with integrable reverse osmosis system HYDROLINE PURE RO-I for undercounter installation. Total height incl. RO-I 400: 820 mm
• VISIOTRONIC Intelligent Control: ensures a simple and intuitive operating with a single button. When the display is activated by a proximity sensor, all the necessary information appears in the large display, in clear text or in the form of symbols
• Rinsing 1.9 l: water consumption per cycle of only 1.9 l which results in a reduction of water, chemicals and energy consumption of 35 %
• CLIP-IN Wash and Rinse Arms both the wash and rinse arms can be lifted out of the wash chamber and replaced with one hand and without any tools
• Intelligent data documentation: automatic recording of important operational data and consumptions and indication on the display
• USB-interface: comfortable download of operational data in form of a protocol via USB
• Fill level indicator: monitors contents of external as well as integrated chemical containers
• PROOF Strainer Control: prevents operation without tank strainer
• GENIUS-X² Fine Filter System: advanced filter system with prewash function reduces detergent consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse cycle to wash glasses with critical design with raised fresh-water amount
• HOT & COLD Rinsing: the rinse can be switched from hot to cold water so that you get cooler glasses without any loss of time
• HYGIENE Machine Care Programme: for removal of calciumcarbonate and other deposits from wash chamber
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose, power cord (400 V connection), detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
• Capacity: up to 48 racks / 770 glasses per hour

TECHNICAL DATA

• Ideal for use with integrable reverse osmosis system HYDROLINE PURE RO-I for undercounter installation. Total height incl. RO-I 400: 820 mm
• ENERGETIC Drying: dry, warm aircombined with an innovative airflow system remove the moisture from the glasses and channels it out of the wash chamber. The glasses no longer need to be dried by hand
• VISIOTRONIC Intelligent Control: ensures a simple and intuitive operating with a single button. When the display is activated by a proximity sensor, all the necessary information appears in the large display, in clear text or in the form of symbols
• VAPOSTOP Door System: prevents vapour to escape from machine when door is opened
• Rinsing 1.9 l: water consumption per cycle of only 1.9 l which results in a reduction of water, chemicals and energy consumption of 35 %
• CLIP-IN Wash and Rinse Arms both the wash and rinse arms can be lifted out of the wash chamber and replaced with one hand and without any tools
• Intelligent data documentation: automatic recording of important operational data and consumptions and indication on the display
• USB-interface: comfortable download of operational data in form of a protocol via USB
• Fill level indicator: monitors contents of external as well as integrated chemical containers
• PROOF Strainer Control: prevents operation without tank strainer
• GENIUS-X² Fine Filter System: advanced filter system with prewash function reduces detergent consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse cycle to wash glasses with critical design with raised fresh-water amount
• HOT & COLD Rinsing: the rinse can be switched from hot to cold water so that you get cooler glasses without any loss of time
• HYGIENE Machine Care Programme:  for removal of calciumcarbonate and other deposits from wash chamber
• Multi-setting: easy switchable from 400 V to 230 V on site
• Ready to install - completely equipped: fill / drain hose, power cord (400 V connection), detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
• Capacity: up to 48 racks / 770 glasses per hour

TECHNICAL DATA

For machine protection the water hardness should not exceed 3°dH, if higher we recommend using an integrated water softener or an external water softener of the product line HYDROLINE PROTECT.

ACCESSORIES

• HOT & COLD Rinsing: the rinse can be switched from hot to cold water so that you get cooler glasses without any loss of time
• Extra large loading height of 425 mm to easily wash extra high glasses    
• VISIOTRONIC Intelligent Control: ensures a simple and intuitive operating with a single button. When the display is activated by a proximity sensor, all the necessary information appears in the large display, in clear text or in the form of symbols
• Intelligent wash water control: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result. This reduces the amount of fresh water used per rinse cycle up to 2.0 l
• Double rack system:  two racks can be washed in a single wash cycle. One rack of cups can be washed underneath, while a second rack containing dishes and cutlery can also be washed above it. Thanks to the optimum use of the entire wash chamber the performance of the machine can be doubled
• CLIP-IN Wash and Rinse Arms  both the wash and rinse arms can be lifted out of the wash chamber and replaced with one hand and without any tools
• Intelligent data documentation: automatic recording of important operational data and consumptions and indication on the display
• USB-interface:  comfortable download of operational data in form of a protocol via USB
•     Fill level indicator:  monitors contents of external as well as integrated chemical containers
• PROOF Strainer Control: prevents operation without tank strainer
• GENIUS-X² Fine Filter System: advanced filter system with prewash function reduces detergent consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse cycle to wash glasses with critical design with raised fresh-water amount
• HYGIENE Machine Care Programme:  for removal of calciumcarbonate and other deposits from wash chamber
• Multi-phasing: can be connected to 400/50/3N as well as 230/50/1 (standard machine comes with three phase cable)
• Ready to install - completely equipped: fill / drain hose, power cord (400 V connection), detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
• Nominal capacity up to 60 racks / 2,160 glasses per hour / with double rack up to 120 racks per hour

TECHNICAL DATA

[1]Thermostop guarantees required temperatures with cold water and / or   230 V connection, the actual cycle times extend accordingly.

ACCESSORIES

• PERFECT Drying Manager: assistance for better drying results
• VAPOSTOP Door System: prevents vapour to escape from machine when door is opened
• HOT & COLD Rinsing: the rinse can be switched from hot to cold water so that you get cooler glasses without any loss of time
• Extra large loading height of 425 mm to easily wash extra high glasses
• VISIOTRONIC Intelligent Control: ensures a simple and intuitive operating with a single button. When the display is activated by a proximity sensor, all the necessary information appears in the large display, in clear text or in the form of symbols
• Intelligent wash water control: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result. This reduces the amount of fresh water used per rinse cycle up to 2.0 l
• Double rack system: two racks can be washed in a single wash cycle. One rack of cups can be washed underneath, while a second rack containing dishes and cutlery can also be washed above it. Thanks to the optimum use of the entire wash chamber the performance of the machine can be doubled
• CLIP-IN Wash and Rinse Arms both the wash and rinse arms can be lifted out of the wash chamber and replaced with one hand and without any tools
• Intelligent data documentation: automatic recording of important operational data and consumptions and indication on the display
• USB-interface: comfortable download of operational data in form of a protocol via USB
• Fill level indicator: monitors contents of external as well as integrated chemical containers
• PROOF Strainer Control: prevents operation without tank strainer
• GENIUS-X² Fine Filter System: advanced filter system with prewash function reduces detergent consumption up to 35%
• AQUA-PLUS Rinsing: intensive rinse cycle to wash glasses with critical design with raised fresh-water amount
• HYGIENE Machine Care Programme: for removal of calciumcarbonate and other deposits from wash chamber
• Multi-phasing: can be connected to 400/50/3N as well as 230/50/1 (standard machine comes with three phase cable)
• Ready to install - completely equipped: fill / drain hose, power cord (400 V connection), detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
• Nominal capacity up to 60 racks / 2,160 glasses per hour / with double rack up to 120 racks per hour

TECHNICAL DATA

[1]Thermostop guarantees required temperatures with cold water and / or   230 V connection, the actual cycle times extend accordingly.

ACCESSORIES

• Built acc. USPHS/NSF regulations
• Ready to install: incl. fill and drain hoses, power cord, class "A"airgap
• Completely equipped with rinse pressure pump and drain pump
• Fine Filter System GENIUS-X2: advanced filter system with prewash function, reduces detergent consumption by up to 30 %.
• Electronic Control SMARTRONIC: with color-coded status indication
• Hood Design EASY-LIFT: 50 % less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50 %
• Rinse Pump ACCURINSE: guarantees a constant 2.5l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
•     Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• Water Softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6,5 kW
• Stainless steel back panel
• Marine stainless steel feet
• Different marine voltages available

TECHNICAL DATA

• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Fine Filter System GENIUS-X2: advanced filter system with prewash function, reduces detergent consumption by up to 30 %.
• Electronic Control SMARTRONIC: with color-coded status indication
• Hood Design EASY-LIFT: 50 % less effort is needed to open the hood – a real benefit for the operator
•     Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50 %
• Rinse Pump ACCURINSE: guarantees a constant 2.5l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• Water Softener NONSTOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6,5 kW
• Marine stainless steel flanged feet
• Different marine voltages available (see below)

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection,
the actual cycle-times extend accordingly.

• Large hood for washing containers and trays up to 660 mm
• Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Wash Programme POWER-PLUS: selectable higher pressure programme to wash heavily soiled wash items
• Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50%
• Rinse System ACCURINSE: guarantees a constant 2,5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 6,5 kW
• Hood System VAPOSTOP (optional): prevents vapour from escaping from the machine when the door is opened (only for AUXX(R)L-11N)

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

TECHNICAL DATA

[1] To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

• Vapo Rinse ECO: switchable steam rinse cycle reduces fresh-water consumption to 1.6 l/cycle
• Washing HOT-TEMP: higher temperature of 63°C increases the capacity up to 75 racks/h
• Cutlery cycle: removes even persistent residues by the use of steam 
• Insulated hood reduces noise and heat loss up to 50%
• Cleaning Cycle STARCH REMOVAL removes the starch from the crockery
• Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
• Wash programme POWER-PLUS: selectable higher pressure programme to wash heavily soiled wash items
• Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Single-button Control SMARTRONIC: with colour-coded status indication of remaining cycle time
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Rinse Pump ACCURINSE: guarantees a constant 1.6/2.3 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 6.5 kW

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection,the actual cycle-times extend accordingly.

ACCESSORIES

ACCESSORIES

• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Fine Filter System GENIUS-X2: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss by up to 50% (optional)
• Rinse System ACCURINSE: guarantees a constant 2.5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 6.5 kW
• Hood System VAPOSTOP (optional): prevents vapour from escaping from the machine when the door is opened (only for AMX(R)-16 and AMX(R)S-16)

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

• Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50%
• Rinse System ACCURINSE: guarantees a constant 2.5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional): transfers waste energy from the hot drain water into the cold fresh water via an integral heat exchanger. Saves up to 6.5 kW
• Hood System VAPOSTOP (optional): prevents vapour from escaping from the machine when the door is opened (only for AMXX(R)-31 and AMXX(R)S-31)

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

• Wash Programme POWER-PLUS: selectable higher pressure programme to wash heavily soiled wash items
• Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50%
• Rinse System ACCURINSE: guarantees a constant 2.5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 6.5 kW
• Hood System VAPOSTOP (optional): prevents vapour from escaping from the machine when the door is opened

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

• Double wide wash chamber can cover even bigger containers, etc.
• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pump and chemical dispenser
• Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time 
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50%
• Rinse System ACCURINSE: guarantees a constant 5 l rinse, independent of on-site pressure. Saves up to 30% water, energy and chemicals.
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 13 kW

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

• Double wide wash chamber can cover even bigger containers, etc.
• Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
• Wash Programme POWER-PLUS: Selectable wash pressure: double wash pumps provide high pressure washing for heavily soiled wash items
• Ready to install: incl. fill and drain hoses, power cord, non-return valve
• Completely equipped with rinse pressure pump, drain pumpand chemical dispenser
• Fine Filter System GENIUS-X²: advanced filter system with pre-wash function reduces detergent consumption by up to 30%
• Single-button Control SMARTRONIC: with colour-coded status indication and remaining cycle time
• Hood Design EASY-LIFT: 50% less effort is needed to open the hood – a real benefit for the operator
• Hood Concept E-STORE with fully enclosed 4-sided hood keeps the steam and also the energy inside the system: energy saving up to 3 kW/h. Less humidity in the kitchen area and better hygienic conditions
• Insulated hood reduces noise and heat loss up to 50%
• Rinse System ACCURINSE: guarantees a constant 5 l rinse, independent of on-site pressure. Saves up to 30% water,energy and chemicals
• Wide Angle Nozzles FAN are precise and efficient: wash water is distributed evenly around the wash chamber
• HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall
• Water Softening System NON-STOP (optional): regenerates simultaneously to the wash cycle without interrupting the cycle duration
• Heat Recovery E-SAVE (optional) transfers waste energy from the hot drain water into the cold fresh-water via an integral heat exchanger. Saves up to 13 kW/h.

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

ACCESSORIES

TECHNICAL DATA

1) To reach set rinse temperatures even with cold water connection, the actual cycle-times extend accordingly.

TECHNICAL DATA

• exact adapting of the washer to your wash ware and to your cleaning result requirements.
• optimised adapting to given considerations of space.
• perfected technology which distinguishes itself by its economic use of energy, water and chemicals.
• efficient monitoring of mechanics, temperature, times of contact and chemical requirements.
• manufactured of CrNi steels, guaranteeing the highest durability of your machine.
• fitted with electrical connections in the standard way, your FUX modular washer can at any time also be supplied with connections for gas, steam or hot water.
• FUX modular plants are meaningful anywhere where high standards are set for large volumes and economy and where optimised cleaning and drying results are required.

• Careful and healthy steaming and blanching
• Three different pressure presets 0 / 0,5 / 1 bar for individual cooking
• Extremely short cooking times
• Individual temperature programme (TP) 50° - 99°C standard
• Cooking cycles electronically controlled
• Steam extractor with exhaust condensation built-in as standard

3 x 1/1 GN pans each up to depth max. 65 mm

2 x 1/1 GN pans each up to depth max. 100 mm

1 x 1/1 GN pan up to depth max. 200 mm

0.5 bar: appr. 110°C

1 bar: 118°C

pressureless: 50° - 99°C

0.5 bar: appr. 110°C

1 bar: 118°C

Perfect for seafood and deli.

Designed specifically for supermarket deli, seafood and carryout departments. For large capacity in a compact size, Hobart steamers can handle all of your steaming needs.

Hobart's HC24EA Series Steamers provide faster cooking with excellent results and uptime.

The HC24EA3 and HC24EA5 steamers go from first-fill to ready in just eight minutes, thanks to their Super Steam superheated steam system with staged fill. A new mineral-tolerant steam-generator design increases the steamers’ uptime. The 5º sloped interior generator bottom and auto-drain JetDrain system help reduce scale buildup—that makes cleaning simple, and keeps the steamers running consistently. 

Hobart's New HC24EO Electric Counter Boilerless/Connectionless Steamer

Who needs a fully plumbed water line to offer your customers delicious steam cooking? Hobart's new Electric Counter Boilerless/Connectionless Steamer gives your kitchen a very efficient steam-generating cooking appliance without any water connections, but with solid sheathed tubular elements (8 kW and 12 kW) embedded in 1-inch-thick cast aluminum for even heat distribution. As a result, vegetables, meats, seafood and more can retain their moisture and color-and make a great-looking presentation-with less energy and water, compared to traditional connected steamers.